Class ApplicationInstance

Adds an observer on a property.

This is the core method used to register an observer for a property.

Once you call this method, any time the key's value is set, your observer will be notified. Note that the observers are triggered any time the value is set, regardless of whether it has actually changed. Your observer should be prepared to handle that.

There are two common invocation patterns for .addObserver():

• Passing two arguments:
• the name of the property to observe (as a string)
• the function to invoke (an actual function)
• Passing three arguments:
• the name of the property to observe (as a string)
• the target object (will be used to look up and invoke a function on)
• the name of the function to invoke on the target object (as a string).

import Component from '@ember/component';

export default Component.extend({
  init() {
    this._super(...arguments);

    // the following are equivalent:

    // using three arguments
    this.addObserver('foo', this, 'fooDidChange');

    // using two arguments
    this.addObserver('foo', (...args) => {
      this.fooDidChange(...args);
    });
  },

  fooDidChange() {
    // your custom logic code
  }
});

Observer Methods

Observer methods have the following signature:

import Component from '@ember/component';

export default Component.extend({
  init() {
    this._super(...arguments);
    this.addObserver('foo', this, 'fooDidChange');
  },

  fooDidChange(sender, key, value, rev) {
    // your code
  }
});

The sender is the object that changed. The key is the property that changes. The value property is currently reserved and unused. The rev is the last property revision of the object when it changed, which you can use to detect if the key value has really changed or not.

Usually you will not need the value or revision parameters at the end. In this case, it is common to write observer methods that take only a sender and key value as parameters or, if you aren't interested in any of these values, to write an observer that has no parameters at all.

Initialize the EngineInstance and return a promise that resolves with the instance itself when the boot process is complete.

The primary task here is to run any registered instance initializers.

See the documentation on BootOptions for the options it takes.

Returns the cached value of a computed property, if it exists. This allows you to inspect the value of a computed property without accidentally invoking it if it is intended to be generated lazily.

Set the value of a property to the current value minus some amount.

player.decrementProperty('lives');
orc.decrementProperty('health', 5);

Destroys an object by setting the isDestroyed flag and removing its metadata, which effectively destroys observers and bindings.

If you try to set a property on a destroyed object, an exception will be raised.

Note that destruction is scheduled for the end of the run loop and does not happen immediately. It will set an isDestroying flag immediately.

Given a fullName return a factory manager.

This method returns a manager which can be used for introspection of the factory's class or for the creation of factory instances with initial properties. The manager is an object with the following properties:

• class - The registered or resolved class.

• create - A function that will create an instance of the class with any dependencies injected.

  For example:

 import { getOwner } from '@ember/application';

 let owner = getOwner(otherInstance);
 // the owner is commonly the `applicationInstance`, and can be accessed via
 // an instance initializer.

 let factory = owner.factoryFor('service:bespoke');

 factory.class;
 // The registered or resolved class. For example when used with an Ember-CLI
 // app, this would be the default export from `app/services/bespoke.js`.

 let instance = factory.create({
   someProperty: 'an initial property value'
 });
 // Create an instance with any injections and the passed options as
 // initial properties.

Any instances created via the factory's .create() method must be destroyed manually by the caller of .create(). Typically, this is done during the creating objects own destroy or willDestroy methods.

Retrieves the value of a property from the object.

This method is usually similar to using object[keyName] or object.keyName, however it supports both computed properties and the unknownProperty handler.

Because get unifies the syntax for accessing all these kinds of properties, it can make many refactorings easier, such as replacing a simple property with a computed property, or vice versa.

Computed Properties

Computed properties are methods defined with the property modifier declared at the end, such as:

import { computed } from '@ember/object';

fullName: computed('firstName', 'lastName', function() {
  return this.get('firstName') + ' ' + this.get('lastName');
})

When you call get on a computed property, the function will be called and the return value will be returned instead of the function itself.

Unknown Properties

Likewise, if you try to call get on a property whose value is undefined, the unknownProperty() method will be called on the object. If this method returns any value other than undefined, it will be returned instead. This allows you to implement "virtual" properties that are not defined upfront.

To get the values of multiple properties at once, call getProperties with a list of strings or an array:

record.getProperties('firstName', 'lastName', 'zipCode');
// { firstName: 'John', lastName: 'Doe', zipCode: '10011' }

is equivalent to:

record.getProperties(['firstName', 'lastName', 'zipCode']);
// { firstName: 'John', lastName: 'Doe', zipCode: '10011' }

Check if a factory is registered.

Set the value of a property to the current value plus some amount.

person.incrementProperty('age');
team.incrementProperty('score', 2);

An overridable method called when objects are instantiated. By default, does nothing unless it is overridden during class definition.

Example:

import EmberObject from '@ember/object';

const Person = EmberObject.extend({
  init() {
    alert(`Name is ${this.get('name')}`);
  }
});

let steve = Person.create({
  name: 'Steve'
});

// alerts 'Name is Steve'.

NOTE: If you do override init for a framework class like Component from @ember/component, be sure to call this._super(...arguments) in your init declaration! If you don't, Ember may not have an opportunity to do important setup work, and you'll see strange behavior in your application.

Given a fullName return a corresponding instance.

The default behavior is for lookup to return a singleton instance. The singleton is scoped to the container, allowing multiple containers to all have their own locally scoped singletons.

let registry = new Registry();
let container = registry.container();

registry.register('api:twitter', Twitter);

let twitter = container.lookup('api:twitter');

twitter instanceof Twitter; // => true

// by default the container will return singletons
let twitter2 = container.lookup('api:twitter');
twitter2 instanceof Twitter; // => true

twitter === twitter2; //=> true

If singletons are not wanted an optional flag can be provided at lookup.

let registry = new Registry();
let container = registry.container();

registry.register('api:twitter', Twitter);

let twitter = container.lookup('api:twitter', { singleton: false });
let twitter2 = container.lookup('api:twitter', { singleton: false });

twitter === twitter2; //=> false

Notify the observer system that a property has just changed.

Sometimes you need to change a value directly or indirectly without actually calling get() or set() on it. In this case, you can use this method instead. Calling this method will notify all observers that the property has potentially changed value.

Returns an object that can be used to provide an owner to a manually created instance.

Example:

import { getOwner } from '@ember/application';

let owner = getOwner(this);

User.create(
  owner.ownerInjection(),
  { username: 'rwjblue' }
)

Registers a factory that can be used for dependency injection (with inject) or for service lookup. Each factory is registered with a full name including two parts: type:name.

A simple example:

import Application from '@ember/application';
import EmberObject from '@ember/object';

let App = Application.create();

App.Orange = EmberObject.extend();
App.register('fruit:favorite', App.Orange);

Ember will resolve factories from the App namespace automatically. For example App.CarsController will be discovered and returned if an application requests controller:cars.

An example of registering a controller with a non-standard name:

import Application from '@ember/application';
import Controller from '@ember/controller';

let App = Application.create();
let Session = Controller.extend();

App.register('controller:session', Session);

// The Session controller can now be treated like a normal controller,
// despite its non-standard name.
App.ApplicationController = Controller.extend({
  needs: ['session']
});

Registered factories are instantiated by having create called on them. Additionally they are singletons, each time they are looked up they return the same instance.

Some examples modifying that default behavior:

import Application from '@ember/application';
import EmberObject from '@ember/object';

let App = Application.create();

App.Person = EmberObject.extend();
App.Orange = EmberObject.extend();
App.Email = EmberObject.extend();
App.session = EmberObject.create();

App.register('model:user', App.Person, { singleton: false });
App.register('fruit:favorite', App.Orange);
App.register('communication:main', App.Email, { singleton: false });
App.register('session', App.session, { instantiate: false });

Register options for a particular factory.

Allow registering options for all factories of a type.

import Application from '@ember/application';

let App = Application.create();
let appInstance = App.buildInstance();

// if all of type `connection` must not be singletons
appInstance.registerOptionsForType('connection', { singleton: false });

appInstance.register('connection:twitter', TwitterConnection);
appInstance.register('connection:facebook', FacebookConnection);

let twitter = appInstance.lookup('connection:twitter');
let twitter2 = appInstance.lookup('connection:twitter');

twitter === twitter2; // => false

let facebook = appInstance.lookup('connection:facebook');
let facebook2 = appInstance.lookup('connection:facebook');

facebook === facebook2; // => false

Return a specific registered option for a particular factory.

Return registered options for a particular factory.

Return the registered options for all factories of a type.

Remove an observer you have previously registered on this object. Pass the same key, target, and method you passed to addObserver() and your target will no longer receive notifications.

Given a fullName return the corresponding factory.

Sets the provided key or path to the value.

record.set("key", value);

This method is generally very similar to calling object["key"] = value or object.key = value, except that it provides support for computed properties, the setUnknownProperty() method and property observers.

Computed Properties

If you try to set a value on a key that has a computed property handler defined (see the get() method for an example), then set() will call that method, passing both the value and key instead of simply changing the value itself. This is useful for those times when you need to implement a property that is composed of one or more member properties.

Unknown Properties

If you try to set a value on a key that is undefined in the target object, then the setUnknownProperty() handler will be called instead. This gives you an opportunity to implement complex "virtual" properties that are not predefined on the object. If setUnknownProperty() returns undefined, then set() will simply set the value on the object.

Property Observers

In addition to changing the property, set() will also register a property change with the object. Unless you have placed this call inside of a beginPropertyChanges() and endPropertyChanges(), any "local" observers (i.e. observer methods declared on the same object), will be called immediately. Any "remote" observers (i.e. observer methods declared on another object) will be placed in a queue and called at a later time in a coalesced manner.

Sets a list of properties at once. These properties are set inside a single beginPropertyChanges and endPropertyChanges batch, so observers will be buffered.

record.setProperties({ firstName: 'Charles', lastName: 'Jolley' });

Returns a string representation which attempts to provide more information than Javascript's toString typically does, in a generic way for all Ember objects.

import EmberObject from '@ember/object';

const Person = EmberObject.extend();
person = Person.create();
person.toString(); //=> "<Person:ember1024>"

If the object's class is not defined on an Ember namespace, it will indicate it is a subclass of the registered superclass:

const Student = Person.extend();
let student = Student.create();
student.toString(); //=> "<(subclass of Person):ember1025>"

If the method toStringExtension is defined, its return value will be included in the output.

const Teacher = Person.extend({
  toStringExtension() {
    return this.get('fullName');
  }
});
teacher = Teacher.create();
teacher.toString(); //=> "<Teacher:ember1026:Tom Dale>"

Set the value of a boolean property to the opposite of its current value.

starship.toggleProperty('warpDriveEngaged');

Unregister a factory.

Overrides RegistryProxy#unregister in order to clear any cached instances of the unregistered factory.

Override to implement teardown.